1. Home
  2. Docs
  3. Cloud Luxury
  4. How to sync a remote

How to sync a remote

base design

Click here to learn how to sync your remote.

Pairing Cloud Remote with Gold Printing and Black Control Box

  1. Tip over bed
  2. Press the red button on the control box, the red light should illuminate.
https://sleephive.com.au/wp-content/uploads/2021/05/Black-Control-Box-1.jpg
https://sleephive.com.au/wp-content/uploads/2021/05/Black-Control-Box-2.jpg

3. Whilst holding the red button down, press any button on the remote.

https://sleephive.com.au/wp-content/uploads/2021/05/Black-Control-Box-3.jpg

4. You should hear a beep which indicates the remote is paired, press any button on the remote to check the pairing. Repeat steps 2 and 3 if unsuccessful.

Pairing Cloud Remote with Silver Printing and Grey Control Box:

  1. Tip over bed
  2. Expose the remote pairing point, either move the control box to the left side of the clip or cut the cable tie and remove it from the clip.
https://sleephive.com.au/wp-content/uploads/2021/05/Gray-Control-Box-1.jpg
https://sleephive.com.au/wp-content/uploads/2021/05/Gray-Control-Box-2.jpg
https://sleephive.com.au/wp-content/uploads/2021/05/Gray-Control-Box-3.jpg

3. Place the remote on the pairing point and move it around.

https://sleephive.com.au/wp-content/uploads/2021/05/Gray-Control-Box-4.jpg

4. You should hear a beep which indicates the remote is paired, press any button on the remote to check the pairing. Repeat steps 2 and 3 if unsuccessful.

Pairing Cloud Remote with Rechargeable batteries:

  1. Turn off power at the wall.
  2. Turn the power back on, within 30 seconds press and hold the head up and foot up buttons. The word pairing should appear on the screen.
https://sleephive.com.au/wp-content/uploads/2021/05/Rechargeable-batteries-1.jpg
https://sleephive.com.au/wp-content/uploads/2021/05/Rechargeable-batteries-2.jpg
https://sleephive.com.au/wp-content/uploads/2021/05/Rechargeable-batteries-3.jpg

3. You should hear a beep which indicates the remote is paired, press any button on the remote to check the pairing. Repeat steps 1 and 2 if unsuccessful.

4. If still Unsuccessful there may be batteries in the power pack. Turn off the power, tip over the bed and either remove the batteries or unplug the control box from the power pack. 

https://sleephive.com.au/wp-content/uploads/2021/05/Rechargeable-batteries-4.jpg
https://sleephive.com.au/wp-content/uploads/2021/05/Rechargeable-batteries-5.jpg
https://sleephive.com.au/wp-content/uploads/2021/05/Rechargeable-batteries-6.jpg

4. You should hear a beep which indicates the remote is paired, press any button on the remote to check the pairing. Repeat steps 2 and 3 if unsuccessful.

5. If you removed the batteries repeat steps 1-3. If you unplugged the control box, plug it back in and repeat steps 1-3.

Was this article helpful to you? Yes 1 No

How can we help?